TP Link extender WiFi light red indicates that your device is prone to major technical issues. The reason behind TP Link extender WiFi light Red issue can be any. Be it improper tp-link extender setup, inadequate power supply, or outdated firmware. But, the good news is that this post is here to put a full stop to your worry! Over here, we have mentioned the best tips that will surely help you troubleshoot “TP Link extender WiFi light red” issue in the blink of an eye. So, what are you waiting for, New Year’s Eve? No? Then, scroll down a little and continue to read!
Also read:- Fix TP Link Extender App | Here’s the Tips
TP Link Extender WiFi Light Red
The Troubleshooting Tips
Check the Power
As we have already mentioned at the beginning of this post that inadequate power supply can also lead you TP Link extender WiFi light red issue. To get it fixed, make sure that your TP Link WiFi extender is getting an adequate power supply from a working wall outlet. Please do not use a damaged or fluctuating wall socket.
The Connection of Course
It is also recommended that you check the connection between your main router and TP Link WiFi extender. Make sure that the Ethernet connection is strong and secure enough. Also, it is recommended to use a cable that isn’t worn out or damaged.
Bear in mind- improper or unstable Ethernet connection can also lead you to TP Link WiFi extender login issues. So, it is important for you to fix the issue as soon as possible.
Update TP Link Extender Firmware
Performing TP Link extender firmware will not just help you resolve “TP Link extender WiFi light red” issue but also prevent you from facing more technical issues. So, without waiting much, visit the firmware update page of your TP Link WiFi extender and follow the instructions as per the extender model you have.
Note: Please check the firmware update availability. Maybe your extender doesn’t need and update. And, during the TP Link firmware update process, we recommend – do not interrupt the process in between. Do not go online or turn off the extender. The TP Link extender firmware update process will be completed shortly. So, you have to remain calm.
Prevent WiFi Signal Interference
Keeping your TP Link extender away from Bluetooth speakers, Alexa and WiFi devices, electronic gadgets, metal appliances, etc. can prevent WiFi signal interferences. If your extender’s WiFi signals aren’t getting interrupted, you itself have a fix in hand for “TP Link extender WiFi light red” issue.
Reset Your TP Link Extender
Is the “TP Link extender WiFi light red” issue still bothering you? No worries! It’s high time that you reset it back to factory default settings.
Mentioned below are the instructions that you need to follow in order to factory reset TP Link WiFi extender:
- Disconnect your TP Link extender and router
- Once you are done, press the reset hole on your TP Link extender
- Press the reset hole for a short while and release it
In the blink of an eye, your TP Link WiFi extender will be reset.
Once you are done with resetting TP Link WiFi extender, configure it again using the WPS method. Want to perform tp-link extender setup without WPS? No problem! Make a connection between your TP Link extender and router, visit the TP Link extender setup page using its default IP, and follow the on-screen instructions.
Wrapping Up
That’s all! Our post has come to an end. With the last TP Link troubleshooting tips, can we hope that the “TP Link extender WiFi light red” issue is fixed?
Wish you all the best and a lag-free experience with TP Link WiFi range extender!
