Sometimes, when you replace a Brother toner cartridge or a compatible Brother toner cartridge, your printer will display an error message on your printer such as ‘toner is low or replace toner. In this article, you’ll discover what you can do to reset your Brother counter for toner in the printer for printing. It can also be helpful to get rid of my Brother printer is offline issue.
The Toner Counter is what you see on the Brother Printer?
Toner counters are generalized guestimations on printers and inform the printer that the toner needs replacement.
Certain laserjet printers cannot read the toner by itself and depend on the counter for page reading being reset after a new toner has been introduced into the printer.
Sometimes, the printer does not reset the toner which could result in an incorrect toner level based on what’s within the cartridge. Brother toners aren’t able to read toner and, therefore, if the toner has not been set by the user, they are incapable of providing an accurate level of toner.
When the Brother printer does not acknowledge the cartridge to be brand new it will show an error. This could be due to chip recognition, or an incorrect application of toner.
In some instances when the use of a Brother Toner cartridge, an error may occur before the toner cartridge is empty.
The Brother printer may show messages such as “replace toner” or something similar. However, the toner will appear brand new upon inspection.
This could occur if the cartridge was not set on the counter after the first cartridge’s installation or if the few documents printed were greater than the guestimations of the page counter of the printer, which are included in the.
To fix this issue, A simple reset process for your printer will omit the error message and let you keep printing.
The most effective way to determine whether there are any mistakes or if the toner may need to be replaced. Are you printing one in black and white? The page or one that is colored?
This will indicate if the toner isn’t working properly nor has deterioration in its quality. The test page printed in color will indicate what toner(s) need replacement.
The best method for doing this is to install the brand new Brother toner(s) and print an uncolored test page in black and white or a test page in color. This will display the upgraded quality of the full-toners.
Print another test page to determine whether you should consider replacing your toner. Be aware that Brother toner print rates are determined by 5% average coverage.
How can reset the counter on the printer of my Brother Printer?
Follow these steps to use the various printer series. The steps you need to follow will depend on the model that you have chosen for your Brother printer. These steps will reset the counter on your printer and enable you to print.
How do I reset toners for the Brother DCP Printers?
The front cover should be opened of the printer’s front cover. It should display “replace toner” or “replace drum “.
Then, press the button to either up or down.
If 00 appears on the printer’s screen Press OK, then remove the cover from the printer.
The message of warning should now be evident. Printing should be able to continue.
How to reset the Brother HL Toner Printers
- Remove the front cover, then remove the drum and toner from the printer. Hit the START key.
- Install the toner and drum back to your printer.
- Click the START button three times, then close the cover on the front.
- The message of the warning should be crystal clear. Printing can continue.
How to reset the Toner on Brother MFC Printers
The front of your printer should be opened, then press the BACK or CLEAR button.
Use the buttons below on the keypad: *, 0 * 0, then zero.
Cover the front of the cover.
The warning message must now be obvious. Printing should be able to continue.
These methods will remove the Brother printer counter and allow you to begin or continue printing in the same way as usual. If you require any additional information on Internet-Ink’s premium Brother toners do not be reluctant to reach out through our contact page.
If you’re still receiving “toner lower”, “replace toner”, “toner ended” or an illuminated light on your Brother printer. Check the following tests:
Make sure you’ve got the right toner for this printer?
Check that there is the proper model number on the drum for your device. Also, ensure that you have a cartridge or drum for the correct item you’ve purchased. In the majority of Brother printers, the cartridge for toner is inside the drum. It’s possible that you need to replace one of them or both.
Make sure you’ve installed the correct toner
Make a quick test for the correct installation of the toners within the printer. Check that the toner is sitting correctly inside the drum unit, and your drum is sitting properly within the printer.
Simple resets are to the printer’s cover and then shut off your printer. Uncover all Brother toner cartridges from the printer. Wipe the cartridges and then check to determine if they’re in good order on the toner cartridges and haven’t dislodged.
The printer should be given a short clean and scrub clean using an online or dust-free cloth. After that, reinstall the toner cartridges in the correct order, with the black cartridge first. Switch off your printer.
Clear the Corona Wire on the Brother Printer
The corona’s wire can get stained by toner powders or the general usage. It is cleaned by sliding the tab between two places and then cleaned using a dust-free cloth. Check that your drum unit and toner are well-maintained.
Dust and toner can be a problem for Brother laser printers when they’re not regularly maintained. It’s easy to carry out and could help you save money while increasing the life that your machine. It is a simple check for dust and powders for toner as well as general clean-up of the toners and drums along with the housing units that they are placed inside.
The cleaning process can be accomplished by looking at the fuser, the rollers, and the waste toner collection With certain machines, there is a possibility of dust accumulations on transfer belts.
To preserve the quality of your prints for your Brother printer, these are routine maintenance tasks that can be completed at home.
Here you can find the best choice toner compatible with Brother Toner. Our toners are all examined and tested to be sure they meet the highest quality of toner available for your device. Toners from us are covered by a one-year warranty as well as no-cost UK delivery. We also have a 24-hour support service to assist you to set up and use the printing device so that you get the most results from your cartridges, and save on costs in the long run.
Also Read: Causes and Solutions for Epson Printer Error Code 0xf1 Issue
