Should the roof get replaced before getting solar panels installed?

Before getting solar installation, Mornington Peninsula homes will need to have a thorough inspection of the roof conducted to ensure that it will be able to withstand the introduction of solar panels. This is especially true if you have had your roof for a while and have performed patch repairs or if the roof will need to be replaced within the next five or ten years or so.

Most solar electricians do not service roofing, though you may find some companies that do. Most often, however, you will need to have roofing done by a licensed contractor and your solar contractor may work alongside them to make sure the roof works well for the solar system that will be installed on your home.

If you will need to replace your roof before getting solar panel installation performed, you should do so as soon as possible. solarmax inverter price are durable and will actually extend your roof’s lifetime. You also will likely not need to re-roof while your system is in place, saving you even more in the long run.

How much does it cost to remove panels to replace roofing?

If you have a problem with the roof of your home and it needs to be replaced after solar electricians have installed panels, you will be subject to additional labour costs associated with removing panels and placing them back onto the home.

It is difficult to give an estimate on the costs of this project, as it will depend on the solar company you work with as well as the size of your solar electricity system and how many panels are being removed. Storage costs may also come into play, which makes it even more difficult to guess how much you will end up paying.

If mounts need to be removed, you will also accrue added costs. For these reasons, it is highly recommended that you stick with the original solar company that installed your panels when handling removals and re-installations – you may even have a warranty that covers some of the costs.

Solar panels are becoming more common, so knowing more about what to expect can help homeowners a lot in the decisions leading up to making the change to solar electricity in their homes. Speak with solar companies in your area to find out more about how to prepare your home for solar electricity system installations.

This however was the beginning of things to come, for August went on to illustrate that the sun’s rays can be used to make ice by connecting the steam engine to a refrigerator device. A medal was awarded to him for his discovery.

Notwithstanding, his one of a kind research was shortly becoming a financial burden for the French, who in turn seek out a cheaper arrangement with the English for a supply of coal. August worked assiduously, trying to come up with alternatives but there was no interest in such a commodity any longer for the French monarch. So the funding of the researches came to a halt!

Experimentation

The first book which was written on solar energy was by a man called William Adams in 1876. The book was titled “A Substitute for Fuel in Tropical Countries.” William had conducted a number of experiments along with his student Richard Day using mirrors; they were able to create a 2.5 horsepower steam engine which was much bigger than Augustin’s horsepower steam engine, whose power was just 0.5. Their design became known as the (Power Tower Concept) and is still a part of today’s world.

In 1883, Charles Fritz was able to convert the sun’s ray into electricity. The solar cell converted at 2% max which became a great turning point in solar energy history.

It was a Frenchman (Charles Teller) at the time of 1885 that experimented with a non-concentrating and non-reflecting solar motor. Charles became the first person to install a solar energy system onto his roof for heating water for domestic use; no one was able to achieve it before 1885. But Charles himself had a passion for refrigeration. As a matter of fact, he was deemed the father of the particular trade. Nevertheless, his desire to pursue his dreams into refrigeration caused a lack of interest towards solar energy researches and experiments, and of course the whole solar pv panels in Lahore thing became dormant. Who knows what our present state would have been if he had only persevered.

The first Solar Company was by John Erickson, a Swedish inventor and researcher, who also had a part to play in the development of the solar energy, created a solar power steam engine that carried similar features as Augustin’s design between the years of 1868-1888. John was the one that coined these words: – “A couple of thousand years dropped in the ocean of time will completely exhaust the coal fields of Europe, unless, in the meantime, the heat of the sun is employed.”

Solar Energy -Industrialization

By the time of the birthing and the dawn of the twentieth century, solar energy was no longer operated as one man experimentation, but it rather became industrialized. In 1892 Aubrey Eneas formed the very first Solar Energy Company -“The Solar Motor Co.” all the way through to 1905. The company kicked off with its mission by selling the world’s first consumer solar energy system to one Dr. A. J. Chandler for an astonishing figure of $2,160.00. The unit did not last a week before disaster struck and it was destroyed in a windstorm. The second unit that was sold also got destroyed in a hailstorm shortly after. These streams of events led to the company’s demise causing their doors to close forever.

Largest Solar Energy System Henry Willsie also took a shot at it by building two huge solar plants in the California state. Henry manages to be the first to operate power at night after storing it in the day. His company was successful in getting the logistics up and running but, it did not succeed in the area of marketing its units to the public and eventually had to close its doors permanently in 1904.

Sun Power Co. constructed the biggest and most cost-effective solar energy system covering 10,000 square feet. Though it was able to produce an enormous amount of steam it was unable to provide sufficient pressure. The merging of Frank Sherman and E.P. Haynes in 1906 gave birth to Sun Power Co ltd. They went on to build an irrigation plant on the outskirt of Cairo that suffered an unfortunate end through the Great War in 1914.

The major opponents of both the solar and wind energy argue that we are no reliable sources to have all the time either. Solar energy, for example, we have not during the night, and wind turbines require a minimum wind speed to work, so if there is no watching can generate energy from this technology.

However it is becoming increasingly easy and inexpensive to produce products to exploit either of these two energies, and advances in batteries for energy storage allowing storage of more efficient and pollute so much.

Want to recommend something to use renewable energy in our homes is to install a hybrid solar-wind to take any of the two sources when available, however, there will always be to have a battery system, because nothing guarantees that there will be any of the two all the time.

The solar energy we can use two different forms in our home, either to generate electricity or to heat the water we use in it. To generate electricity using photovoltaic panels, which convert sunlight into electricity to heat water and use the so-called solar heaters, which take the thermal capacity of the sun’s rays to heat and not having to use gas or electricity to do so.

The same features that make these panels more attractive also make them more efficient. Announced March 2012 SunPower broke their own record with and even higher efficiency with the new SPR 327 panel. They are able to absorb more sunlight because the unattractive grids are not in the way. Also, with the electrical conductors on the backside of the panels, they push the missed sun particles up through the cell so that it can also be used instead of being wasted energy. Solar panel efficiency is important and something that any experienced solar company will consider.

The SunPower system actually produces more power from less square footage of panels, and it’s a substantial amount of energy which is up to 50 percent more power than standard panels. Because you are able to generate more electricity with these high efficiency panels, you can save more money on electric bills over the life of the panels. The panels blend into your roof so that they are barely noticeable while producing more energy than standard solar power panels.

They take less time to install and they can be used on complex rooftops where it would be difficult to install standard panels. These panels can also be used on rooftops with shade. SunPower has been around since 1975 and is so confident in the quality of their product that they offer an industry leading 25 year warranty on their panels performance and exceed the industry standard of 5 years to a 10 year warranty on workmanship. Another very beneficial feature of SunPower panels is a new panel that has a patented micro inverter on each panel, it is possible to monitor each of the panel’s performance on your computer through a SunPower Monitoring System interface.

However, several companies continue to use regular power systems to run operations. Due to the initial costs involved in installing and setting up a power plant, many organizations put off the use of this renewable source of energy. That said, when it comes to preserving what’s left of nature, it becomes a moral duty to work on ways that can contribute to saving the environment. That is why, we’re here to talk about why your choice matters in conserving nature.

Your choice and role in conserving nature

What happens when you decide to use solar energy?

The consequences are favorable to the environment and life in more ways than one.

Producing traditional electricity requires thousands of liters of water annually. Reason being that water is used for the purpose of processing and refining fuel, transporting fuel through pipes, and cooling generators. When it comes to solar panels, generating power does not require the use of water, except for the cleaning and washing of the panels periodically.

A byproduct of producing traditional electricity is air pollution during the burning of fossil fuels. The production of carbon dioxide and methane gasses lowers the quality of the air around us. Breathing this poor quality of air daily can lead to several medical conditions, including asthma, bronchitis, allergies, pneumonia, headaches, anxiety, heart attacks and even some cancers. However, utilizing the power of the sun significantly reduces the need to burn more fossil fuels, and hence, the reduction of methane and carbon dioxide in the air.

In addition to air pollution, the increasing production of toxic gasses into the atmosphere enhances the effect of greenhouse emissions. This naturally leads to warming the earth more than it can handle, and is linked to many catastrophically natural calamities. In recent years, there has been an increase in the incidents of cyclones, flooding, storms, drought and extreme heat. However, generating electricity through solar panels produces lesser to no greenhouse gasses whatsoever. This process aids in reducing the effect of climate change if used extensively. With the use of solar energy powering a home or business, there is no need to burn fuel and produce more toxic emissions from energy production.

Seeing as it the cleanest source of energy, solar power is a means to an extremely effective way of making your household more efficient and sustainable. Solar panel installations like Jinko Solar or Trina Solar do not require the use of any water to generate electricity. They don’t release harmful gasses into the environment, and the source of their energy is abundant. To top it all, it’s free as the sun’s power is dawned upon the earth naturally.

That said, regular sources of energy like natural gas, coal, or nuclear energy are not replenishable, making them non-renewable resources. However, the sun’s energy is massive and is gifted to us for free. Studies show that if the sunlight’s energy shining on the earth could be harnessed for a period of one hour, that amount of energy can be used to power the world for an entire year. Therefore, decreasing our dependence on non-renewable resources, and benefitting from the abundance and free source of energy can prove to be more of an advantage for humankind.

In conclusion, conserving nature is more a need than simply a decision. Therefore, contemplating your decision of whether or not to introduce solar panels to your organization’s physical setup depends entirely on you. Remember that by making this decision, you are helping conserve nature and all that it stands for!

Do you need a consultation on the benefit of solar energy and how you could use it for your residential or commercial space? We’ll consult you for free, so connect with us today, tell us about your project, and stand a chance to get a quote as well.

Source:https://beyondsolar.net/blogs/news/conserving-nature-why-your-choice-matters

One reason that it is good for you to convert to solar is because of the change that you will have on the environment. This type of energy is conducted by using the power that comes naturally from the sun. That means you will not be contributing to the pollution that is caused by generating the type of energy that you are currently using.

If helping the environment is not a good enough reason to make the switch, then perhaps helping yourself will give you motivation. You will be able to cut out your monthly electric bills when you have a solar energy system that generates all of your electricity. Since you will be using energy that the sun provides it will be free for you.

Another reason to convert is the ability to have unlimited power available in your home. Are you tired of stressing over leaving a light on too long? Falling asleep with the television on? And everything else that seems to contribute to the high cost of your electric bill each month? Well now there will be no reason to worry because you will not be paying for the electricity that is being used in your home. You will be able to use all the energy you want without worrying about the costs.

Tax incentives are available for those who convert their homes to use the top 10 solar companies in Pakistan. That’s right! The government will actually pay you money so that you will get off the power grid of your local electric company. In some cases the government will actually pay half the costs that are incurred when you purchase the solar energy system for your home.

Finally, when you install solar panels they will last for a long time. Most of the ones that are available these days have the ability to last for up to 30 years without ever needing to be replaced. That means that you can enjoy using solar energy for the rest of your lifetime and your kids will be able to enjoy using it after you are gone.

These are some great reasons that you should convert to solar. There are a lot of other benefits not listed here that you will be able to receive as well. If you have ever thought about wanting to switch over to solar power, then now is the perfect time to do it.

With extraordinary costs already running through the roof, there is a need to create a long-term and sustainable solution wherever needed. Therefore, corporate or commercial setups require solar-powered LED lights when it comes to curbing power supply expenses.

In this blog, we’ll take you through some of the major benefits of installing solar lighting for business.

What is solar lighting and why is it needed for commercial setups?

Conventional and industrial production of energy continues to use up exhaustible resources at a rapid rate. The concept of solar lighting was developed based on the urgent need to ensure a sustainable solution for renewable energy sources.

Solar lighting is a lighting system that is made up of LED lamps, batteries, solar panels, charge controllers and an inverter. Solar lamps are created to collect the natural energy of the sun and transform it into lighting setups. For instance, once the energy is collected in a solar flagpole light during the day, it is stored in a rechargeable gel cell battery and used in the evening.

Therefore, businesses can use solar lighting to convert direct sunlight into usable energy. This process can help in saving high power usage and paying thousands of dollars annually.

Apart from the cost-cutting advantage, installing a solar lighting system at your commercial property can provide several benefits, some of which are:

• Creating revenue from solar generation
• Improving safety, sustainable and reliable power supply
• Stressing less about the time and losses incurred through power outages
• Lowering carbon footprint
• Significant return on investment
• Increased property value

New levels of performance for commercial setups with solar lighting

Solar lighting systems are available in different ranges depending on the requirement at the venue. They range from a small one-LED fixture integrated with a panel and battery to powerful floodlights that can light up an expansive area by a large solar power system mounted on a pole. Therefore, using solar energy can take your commercial setup to new levels of performance.

Not convinced about using solar energy for your corporate space? Let’s take a look into what you get with solar lighting.

• Energy-saving alternative

Solar-powered LED lighting is powered by solar energy, and is therefore an alternative to traditional lighting. This system of lighting does not use the traditional grid power that consumes more electricity. The batteries used for powering any commercial setup utilizes solar energy stored during the day. At night, the LED fixtures can operate off the stored power to illuminate the designated area.

• Installation is affordable

The installation of commercial solar lighting is cheaper than the trenching and line running needed to connect traditional lights to the grid. Poles are set up without the need for underground conduit. The wiring is located at the top of the pole or on a nearby pole. It’s also a low voltage setup, making it safer for installation, operation, and maintenance. Furthermore, barriers such as root systems, underground utilities, or other associated systems with standard electric trenching are used.

• Smooth operation

Solar LED lighting systems are maintenance-free once installed, since the LED lights can run for an average of two decades. The usual upkeep of a commercial solar lighting system requires battery replacement every five to seven years. While changing the battery, a visual check of the solar panel’s glass and light fixture and cleanliness of components is necessary.

• Improved safety

Solar LED lighting helps in cutting costs and saving energy with the added benefit of creating safety in communal spaces. For instance, the Natron Solar Street Lights helps customers and employees better manage their way while on the move, reducing the chances of trip-and-fall hazards. Also, crime is most likely to be prevented in well-lit areas. To put it simply, solar LED lighting helps customers and employees with a unique experience that is different from anywhere else. Sometimes, the change is visible and sometimes it’s intangible yet present because passersby can feel it.

Are you planning to set up solar lighting for your commercial setup? Connect with us at Beyond Solar to learn the best ways to leverage your company’s power supply through solar lighting systems.

Source: https://beyondsolar.net/blogs/news/advantages-of-solar-lighting-for-business

Today, pathway lights are not just limited to landscape lighting at homes but are used to illuminate roadsides, sidewalks and even open spaces like parking lots.

What makes solar fixtures more effective?

Key factors:

1. Powerful backup batteries
2. LED chips
3. Technology integration

Since outdoor lights need to be turned on at night, most pathway lights come with a backup battery to store electricity generated by a solar panel. Most contemporary solar lights are powered with strong backup batteries

Additionally, they are equipped with high-performing LED lights that produce a high amount of lumens per watt, thus consuming less energy. The installation of powerful lithium batteries and LED lights, which have transformed the lighting industry, enables solar-powered lights to stay illuminated for at least 12 hours.

Nearly all of Beyond Solar’s outdoor lights come with batteries and solar panels that are attached to the fixtures, making them simple and easy to install. The lights that come with separate parts can be assembled without a hassle. The fixtures are equipped with powerful LED chips, making the lights extra bright and effective.

In order to utilize energy more efficiently, modern solar pathway lights are also equipped with motion sensors. On detecting movement within a certain radius, the brightness of the lights increases. Apart from increased visibility, this feature makes outdoor solar fixtures suitable for security purposes.

Improvements in design enable outdoor solar lights to enhance the ambiance of the site they have been installed at, be it a road or a sidewalk.

How do LED lights contribute to solar fixtures?

Powering LED lights with solar energy has made off-the-grid outdoor fixtures much more effective and efficient. Unlike traditional fluorescent bulbs, LED lights:

• Are energy-efficient
• Generate less heat
• Convert upto 70-80% of the energy into light
• Have a long life
• Have high brightness
• Have a color range and therefore can be used for multiple purposes
• Provide directional lighting

Another reason why LED lights are suitable for solar fixtures is that the industry is constantly evolving to resolve lighting problems and challenges faced by the commercial and residential sectors. Innovations in the industry have led to higher lumens per watt, increased brightness and unique designs.

Ok, but why do we need solar pathway lights?

For many reasons.

Solar lights are environment-friendly, but of course, you already knew that. Since they are powered by the sun, they are not a burden on the national grid. They are also energy-efficient, extremely cost-effective and long-lasting — which means almost non-existent replacement costs.

Maintenance costs are off the table as well because little to no maintenance is required for the lights to function at their best. Solar panels are usually tilted so they can easily shed snow and water.

Why are they suitable for pathways though? It is important for roads, sidewalks and pathways to be well-lit. Traditional fluorescent and incandescent lights use up more energy, are a burden on the national grid and need constant repair and maintenance. It is economical to install solar fixtures due to minimal maintenance cost, long life and energy efficiency. Most solar lights carry warranties that last for years, so even if they have to be repaired within the first few months, the cost will not have to be borne by the end-user.

Due to innovations and developments in solar technology, the fixtures are available in several unique designs, which add to the aesthetic of the place they are installed at. The incorporation of technology, including motion sensors, makes solar lights ideal for security purposes as well.

Key reasons for installing solar pathway lights:

• Environment-friendly
• Long-lasting
• Minimal maintenance costs
• Energy efficiency
• Unique and innovative designs add to aesthetics of surroundings
• Equipped with modern technology

How effective are Beyond Solar’s CAPE Lights?

Beyond Solar has a wide range of landscape lights to illuminate walkways and gardens for the residential sector. We also offer lights for roadsides and pathways. Each product has unique features that set it apart from other products in the market.

Find out more about Beyond Solar’s Pathway Lights.

As a company, we ensure that our lights are not only unique in design but are also compact and efficient. We focus on making sure that our lights are easy to install, energy-efficient, and provide the best lighting

Our Post Top CAPE Lights are designed to illuminate roadsides, pathways and open spaces. They are equipped with high-performing LED lights, a solar panel and a backup battery. The solar is made of Grade A monocrystalline cells and has an efficiency of 19.4%.

The light is easy to install on a pole and with a powerful and eco-friendly battery LifePo4 battery, is a sturdy performer and can work in extreme temperatures ranging from -4°F to 149°F. The light is equipped with a microwave motion detector that can detect motion within 26.2 feet radius. The design of the CAPE Light is both modern and archaic, adding to the beauty of the place it’s installed in.