The Netgear EX8000 Setup, a triple band wifi repeater, is incredibly easy to use. You can raise the speed of the Nighthawk AC3000’s dedicated 5 GHz band so that it can support your computers at up to 1.7 Gbps. The following are some of the different ways to set up a Netgear EX8000:
- Connect your WPS Wi-Fi enabled EX8000 device. The secured setup method is the quickest way to configure your EX8000 Wi-fi extender because it doesn’t require you to log into a computer or supply any personal data.
- To connect the EX8000, use the Netgear Installation Assistant. On your wifi-enabled device, you must first turn on the internet before selecting the Netgear Installation Assistant.
High speed internet connection is provided through the Netgear EX8000 extender configuration. You may get speedy WiFi performance and dual-band AC WiFi from it. Your present router’s Netgear WIFI extender establishes a Fastlane connection.
The Netgear EX8000-AC3000 can be installed manually, with installation assistance, or by using WPS.
How to setup the Netgear EX8000
Setup instructions for the Netgear EX8000- AC3000 are provided below.
- Select a cable or wifi connection to connect your extender to the internet after turning it on.
- Once your PC or smartphone is linked, launch your favourite web browser.
- Enter your username and password in the corresponding areas on the extender’s login page by using the URL myWiFiext.net.
- The Netgear Genie page will now appear on your computer.
- Then, based on how your system is configured, you must choose between two options.
- After making your selections, simply click Save to finish configuring your Netgear EX8000.
Netgear EX8000-AC3000 login procedure
In order to log into your Netgear AC1200 extender, follow the steps below:
- Open a web browser on a smartphone or tablet that is connected to your extender’s network.
- In the event that your extender and router have different WiFi network names, type www.mywifiext.net into the address bar of your web browser (SSIDs).
- If your extender and router have the same Wireless internet name, type http://extender’s IP address into the email field of your browser (SSID).
- CLICK ENTER
- Please enter your username and password.
- Login by pressing the button.
- Select Settings to examine and edit the extender’s settings.
Thus, the setup of your Netgear AX1800 Extender has been successfully completed.
Netgear EX8000 Setup | WPS Method
The Netgear wifi extender may be set up using WPS (WIFI PROTECTED SETUP), which is the simplest method. As stated in the guidelines below:
- Start by turning on your extender.
- Press the WPS button for a while now.
- When your extension and router are properly connected, your LED indicator will turn green.
- Repeat the process using the dual band range extender.
- The network password you use for your router’s network should also be used here.
- You can consult the WIFI extension documentation to learn the default username and password.
- Finally, connect your wifi equipment to the Netgear_ext SSID.
Now that the Netgear Nighthawk EX8000 has been set up using the WPS method, congratulations!
Netgear EAX8000 setup | Manual Method
Setup instructions for the Netgear Nighthawk EX8000- AC3000 are provided below.
- Select a cable or wifi connection to connect your extender to the internet after turning it on.
- Once your PC or smartphone is linked, launch your favourite web browser.
- Enter your username and password in the corresponding areas on the extender’s login page by using the URL myWiFiext.net.
- The Netgear Genie page will now appear on your computer.
- Then, based on how your system is configured, you must choose between two options.
- After making your selections, simply click Save to finish configuring your Netgear EX8000.
Netgear EX8000 setup without WPS
In order to configure your EX8000 AC3000 without WPS, follow the steps below:
- In order for the LED light to stabilise, plug your EX8000 AC3000 into an electrical outlet and hold on.
- Keep the extender and router in the same location.
- The increase will take some time.
- Connect your extender to the router at this point.
- The extender’s LED light will turn green after it is connected to the router.
- Launch your preferred web browser.
- Go to mywifiext.net and enter your login and password after clicking there.
You’ve now successfully finished your Netgear EX8000 AC3000 setup without WPS.
Netgear EX8000 Setup | Troubleshooting steps
Follow the troubleshooting instructions below to resolve any problems encountered during Netgear AC3000 Extender setup:
- The Nighthawk EX8000 extender is properly connected to the main power source.
- Make sure your electrical outlet is functional and not damaged or shorted out.
- Utilise a quick connection.
- Make sure all of the cables are firmly attached.
- Utilise only undamaged cables.
- Put your extension within the signal range of your router. In the address box, double-check your spelling if mywifiext.net isn’t working.
- Update the firmware on your extender to the latest recent version.
- Restore the Netgear EX8000 extender’s settings to their default positions.
How can I set up my Netgear EX8000 to change the firmware?
Let’s discuss how to examine a Netgear EX8000 AC3000 wireless extender’s firmware:
- Before updating the firmware, make sure your EX8000 AC3000 extender is connected to the power outlet properly.
- The Nighthawk Ext network should be accessible from your computer or mobile device.
- Open a web browser when you’ve made a connection, and type www.mywifiext.net into the address box.
- Your current location is the Netgear Nighthawk EX8000 Extender page.
- Use your passwords to access your account.
- It will take a few minutes to check for firmware upgrades.
- You can start updating the Netgear AC3000 extender’s firmware by choosing “Yes.”
NOTE :- Do not unplug or take the Netgear EX8000 out of the power outlet when updating the firmware.
Netgear EX8000 Setup via Help with installation
The steps listed below should be followed if you want to customise your EX8000 utilising the installation method:
- The router and Netgear EX8000 should be placed in the same location.
- It will switch on right away if you plug it into a power outlet.
- Your device needs to be turned on, the wifi manager opened, and then linked before it can join to the Netgear extenders network.
- Use a web browser to visit the website mywifiext.net.
- Next, input your username and password along with other login details.
- It will then display the Netgear installation manager.
- Finally, finish configuring your extender by following the instructions displayed on the screen.
Using the Installation Assistant method, the NETGEAR EX8000 setup procedure has finally been completed.
How to connect Netgear EX8000-AC3000 Mywifiext.net
192.168.1.250 is the IP address you use while setting up an extender or purchasing a new one. Customers often find it difficult to understand. You must first comprehend what it is related to in order to comprehend what it performs and how to access it. To connect to the personal devices of the Wi-Fi extender, use this IP address. Before going any farther with 192.168.1.250 or mywifiext.net, let’s just study more about Netgear extenders. A tool used to improve a router’s connection and range is called a Netgear extender. Wi-Fi signal strength and the number of devices that can connect to a network are typically restricted.
Using Mywifiext.net to set up a Netgear EX8000
- The WiFi Extender Setup must be connected to and activated.
- Next, establish a connection between your PC and your Netgear AC3000 Extender.
- Go to www.mywifiext.net in your browser after opening it.
- The choice for New Extender Setup will then appear.
- To finish the Netgear AC3000 extender setup, adhere to the directions displayed on screen.
Netgear EX8000 AC3000 Extender | reset process
Follow the instructions below to reset the Netgear setup:
- When you turn on your extension, the LED lights will change to a green colour.
- Now it will take at least 5 minutes to stabilise the LED lights on your extension.
- Determine the reset button on your extender.
- Now hold the reset button down with the similar-sized object for up to 10 seconds to get the LED light to blink.
- At least 5 minutes will pass while the LED lights on your extension are stabilising.
- Now that your Netgear wifi extender has been successfully reset.
Because the terms “Mywifiext.net” and “Mywifiext.local” are the same, you can check your default login IP address, give us a call at our toll-free number, or chat online with one of our experts if you’re still having problems.
