Do you think the current WiFi range of your home network is limited? If so, you should get a Netgear extender. A WiFi range extender boosts the existing network range. Thus, you enjoy blazing fast internet from any corner of your house. But, before you can enjoy that, you need to perform a Netgear extender setup.
So, this article is going to cover the Netgear extender setup process in brief. The presence of different methods to do extender setup might confuse you. Hence, one of the simplest methods is covered in this article. All you need is a computer or laptop and a seamlessly working internet connection. Keep reading to know how to get started.
Steps to Do Netgear Extender Setup
Turn on Extender
Start with taking out the Netgear extender from the box. You should not forget the Ethernet cable. Moreover, if there are antennas in the box, you should get them out as well. Further, you should check the extender for any physical damages.
Router-Extender Connection
In the next step, you need to connect the extender with the host router. There are two ways you can connect them. Firstly, you can form a connection between the two using an Ethernet cable. Apart from that, you can also link them wirelessly.
The Ethernet cable should be tight on both ends. Moreover, it should not be worn out .
Tip: While forming a wireless connection, make sure the extender and router are placed close to each other.
Place the Extender
Extender placement is one of the most important components in the Netgear extender setup process. So, you should first analyze the surrounding where you want to place your extender. Make sure you choose the central location to ensure there is equal distribution of WiFi signals.
You should know which objects could hamper the WiFi signals. A few examples include mirrors, metal objects, microwaves, refrigerators, T.V., etc. So, you should be aware of these objects while placing the Netgear extender.
Open Web Browser
The time has come to access the internet using a computer. So, you should turn on your computer. If you don’t have a computer, you should use a laptop. Make sure the system is up to date and is getting a continuous supply of electricity.
Once your system is running smoothly, you should open a web browser. However, it should be up to date. Apart from that, the web browser must be compatible with the operating of your computer or laptop.
Access Official Web Address
To complete the Netgear extender setup, you need to get access to the extender dashboard. Thus, to do that, you should first open the extender login page. So, type the mywifiext web address in the address bar of the chosen web browser.
Users commit lots of typing errors while entering the official extender web address. So, be careful. Moreover, you should also avoid using the search bar of the web browser. Press the Enter key after typing in the correct web address.
Do Extender Login
An extender login page appears on your computer screen. You need to enter the extender login details. So, you should refer to the extender user manual to know your default login credentials. Further, you should not make any typing errors. Always keep the Caps Lock key off while entering the login details. After that, you should click the Log In button.
Follow On-Screen Instructions
You get access to the Netgear extender dashboard when you do the extender login. Hence, you need to follow all the on-screen instructions to finalize the extender setup process. If asked, you should reboot your extender to save the settings that you just applied.
Conclusion
In case you can’t access mywifiext web page, you should use the 192.168.1.250 IP address. Thus, you get direct access to the extender login page that will help you easily do the extender setup.
