Want to perform Netgear Nighthawk AC3200 setup Worry not! Check out the following steps to know how to initiate the router setup process. So, without any further delay, let’s get through the points mentioned below. These will give you a step-by-step guidance on how to do the Netgear Nighthawk AC3200 setup.
Make sure you don’t miss out on even a single point. Otherwise, you might face some issues. So, without any delay, let’s get going. Keep reading.
How to Do Netgear Router Setup?
Unbox Router
Start with unboxing the Netgear Nighthawk AC3200 router. Take it out of the box along with the antennas and Ethernet cable. Moreover, don’t forget the user manual. It will come in handy when you have to do the router login.
Connect to Modem
Connect the router to the modem. That is where the Ethernet cable comes to play. Apart from that, you can even connect both devices wirelessly. However, while doing that, you should ensure that router and modem are placed close to each other.
Place the Router
Router placement is also crucial when you do the Netgear Nighthawk setup process. Place the router in the central location of your house. Moreover, it also depends on whether your house has a basement or first floor. So, check all the facts while placing the router in your house.
Open PC
Turn to your PC and plug it into a wall socket. Further, press the power button on your PC to start it. Make sure the power supply cable is in perfect condition. In short, the PC you are using should get a consistent power supply during the setup process.
Access Web Browser
Open a web browser on your computer. While doing so, you need to keep a few things in check. At first, it should be up to date. Also, the web browser must be compatible with the device you are using. Moreover, the web browser should be clean. It means you need to delete cookies and cache from your web browser.
Enter Official Web Address
When you have the access to the web browser, you need to enter the official Netgear web address. That is where you need to enter www.routerlogin.net in the address bar. Make sure there are no typing mistakes.
Do Router Login
Press the Enter button to open the router login page. That is where you have to enter your router login details. You can refer to the user manual to know what your default login credentials are. Click the Log In button after you are done with entering the login credentials.
Follow On-Screen Instructions
When you get access to the router dashboard, you need to follow the onscreen directions. These come in handy to finish the setup process. With everything in check, you enter the last steps of the router setup process. Save the settings to set up your router.
End Note
As you can see, the setup process is fairly easy. You need to ensure that you don’t commit any mistakes on your end. When you keep a closer check on mistakes or errors that might happen, you can rest assured to have done the setup process perfectly. With that, you get access to faster internet connectivity in your house.
