Do you know you can extend the current WiFi network in your house? That’s right! You can do that by installing a Rockspace WiFi extender. The setup process is fairly easy. You require a laptop or computer and a seamlessly working internet connection.
Let’s get you through the following points to help you understand the setup process. Without further delay, let’s get started. Keep reading.
Rockspace WiFi Extender Setup Steps
Unbox Extender
Start with unboxing the Rockspace extender. Make sure you don’t damage the extender while taking it out of the box. Further, take out the antennas (if any) along with the Ethernet cable. In case there are any power adapters, you should also get them out.
Check Power Supply
Run a physical inspection of the wall sockets. In case you are using a power supply wire, check it for cuts. When everything seems good, connect the extender to the fully functional wall socket. Make sure there are no power cuts or short circuits.
Place the Extender
Choose the best location for the extender and set it there for the extender setup process. Make sure you get rid of reflexive, metal, water sources, and electrical appliances while setting the Rockspace WiFi extender.
Connect Extender to Router
You need to ensure the extender gets a proper internet connection. For that, you should connect it to the host router. Connect them with the Ethernet cable that you got with the Rockspace WiFi extender. Or, you can simply connect them wirelessly.
Open Computer
Turn to your computer or laptop. Further, connect the device to a power source and power it on. Make sure it stays awake throughout the whole setup process.
Access Web Browser
Open a web browser on your computer. It should be updated to the latest version. Moreover, it should also be compatible with the version of the operating system running on your system. If that is not the case, you should either replace it or download the compatible one.
Enter Official Web Address
Enter the official Rockspace WiFi extender web address in the web browser. However, you should ensure that you enter it in the address bar. Furthermore, there should be no typing errors while entering the web address.
Do Extender Login
An extender login page appears on your screen. That is where you have to enter your login details. So, you are advised to keep the login details by your side before starting the setup process. Click Log In button to enter the Rockspace extender dashboard.
Follow On-Screen Directions
Go through all the on-screen directions or instructions that you come across. If anything needs to be changed as per your requirement, feel free to do so. After that, you should accept and save the changes.
Finish Setup
Finish the extender setup process by saving the changes. In some cases, you might be asked to reboot the extender. Thus, restart the device to complete the setup process.
Note: Most users get confused with Rackspace. So, if you are also doing Rackspace admin login for extender setup, don’t do it. Rather, follow the above-given steps.
Conclusion
Congratulations! Your Rockspace WiFi extender setup is complete. You can now enjoy seamless internet connectivity in every inch of your house. It helps you stay connected with the world around you right from your comfort zone.
