How to login Wavlink AC1200 WIFI Extender

• Plug the extender into the outlet after removing it from its packing.
• When the power LED light turns green, press the power button.
• Your WiFi device should be connected to the Ap extender’s Ext setup.
• After that, enter Ap.setup into your browser.
• The Wavlink repeater settings page is where you are right now.
• Utilising AP Login, create a profile.

Note:- Visit the official ap setup page or contact our specialists if you need help with your wifi extender.

Installation of Wavlink AC1200 WIFI Extender

Follow these instructions to connect to the Wavlink AC1200 extender using a browser:

• You must plug your AC1200 Range Extender into an outlet.
• Your extension must now be in repeater mode.
• Access the WiFi settings on your computer or smartphone by navigating there.
• Find and join the Wavlink-N network in a similar way.
• After connecting to the extender network, open any web browser, such as Mozilla Firefox, Google Chrome, etc.
• Also enter 192.168.10.1 in the address bar.
• The Wavlink AC1200 configuration page is where we are right now.

Note :- Please get in touch with our experts or visit the official website if you need help with your Wavlink wifi extender.

Wavlink AC1200 Extender Setup via WPS method

See the information below for a step-by-step tutorial on setting up the Wavlink AC1200 with WPS:

• The Wavlink AC1200 must be connected to a power source.
• Make sure the extension is on by keeping an eye out for the blue light to come on.
• Press the WPS button on the extension as soon as you can.
• Then, on the cable or wifi connection, press the WPS button.
• It is not advisable to disconnect the AC1200 while the extender’s LED is blinking.
• At this point, the Wavlink AC1200 WPS configuration is complete.
• As a result, the WiFi extender’s power, client, device, and WPS indications will all turn green.
• Install the Wavlink extension as soon as possible in areas with reliable WiFi and high traffic.

Wavlink AC1200 setup via manual method

Let’s quickly review how to manually install the Wavlink extender:

• The installation process for this extender is really straightforward and offers more than three choices. We will now look at the Wavlink AC1200 WiFi Extender with AP’s whole setup procedure.
• Connect your Wavlink extension close to the primary modem or router.
• when the extension’s powerful light first shows.
• Grab a wifi-capable phone, tablet, or laptop.
• Next, choose WiFi from the Settings menu on your wifi device.
• The name of the network will appear. Installing Wavlink Extender Ext
• After connecting to the “EXT” network, type ap.setup into any available web browser’s URL field.
• The screen will then display the new extension setup page.
• You must adhere to the AP Extender setup instructions in order to install or connect the extender.

How can I reset my Wavlink Dual-Band AC1200 WiFi Extender?

• Make sure the extender is plugged into an outlet before resetting the Wavlink AC1200.
• Light the LED after turning on the extension.
• Find a paperclip or a toothpick by looking around.
• Release your grip on the pinhole ten to fifteen seconds after hitting the reset button.
• Wait until the power LED light’s amber tint changes to a solid shade of green.
• Since the reinstatement of factory defaults, the extender
• The WiFi extender needs to be reinstalled and set up in accordance with the Wavlink AC1200 instructions.

Note:- Please get in touch with us via live chat or New Extender setup if you experience any configuration issues with your Wavlink AC1200 extender settings.

Before Getting Started with Setup Process

Here is a rundown of everything you’ll need in order to install and configure your Wavlink extender before you get started with the setup process:

1. Your Wavlink wireless range extender
2. A router
3. A web browser
4. An Ethernet cable offering a faster transmission rate after being subjected to work
5. Continuous i.e. stable power delivery
6. Powerful internet speed

Once you’ve gathered the aforementioned materials, follow the detailed instructions below to set up your extender.

How to Perform Wavlink Range Extender Setup?

Step 1: Initial Setup (Hardware Configuration)

Maintaining the correct location for your extender is essential for a problem-free wifi.wavlink.com setup procedure. If you’re having trouble deciding where to put your Wavlink extender, take these into consideration.

• Make sure the extender is in a convenient location to hook into a power source.
• Keep the range extender away from anything that might cause interference, such as a microwave or a baby monitor, or a cordless phone.
• If at all possible, have the router and the extender in the same room.
• Don’t put any obstacles like walls or furniture in the way of your Wavlink WiFi extender; instead, keep it high up.

Step 2: Create a Connection Between Your Devices

When you’re finished installing the extender, connect your devices by following these instructions:

• Connect the extender to a standard electrical outlet.
• You may connect it to your home network with an Ethernet wire.
• If you want to use you’re wireless source, consider taking the extender-router distance into account.

Step 3: Access the Extender’s Admin Interface

Access your extender’s administrative interface and configure it as needed. Wavlink’s wireless range extenders have a default login page set up at http ap setup or wifi.wavlink.com. The following measures are to be taken:

• Launch the web browser of your choice. One may choose from a number of available alternatives: A variety of browsers, including Chrome, Firefox, Internet Explorer, Edge, and Safari.
• Simply enter the default web URL into your browser.
• Enter the default IP address into the address bar in case the web URL ceases to work.
• After that, you’ll be able to see the login screen.
• Hit Login after entering the required info.
• You have arrived at the Wavlink extender setup wizard for setting up your Wavlink device.
• You can easily configure your extender by following the on-screen prompts.

Kudos! The installation of your Wavlink range extender was successful. You may begin using the extender immediately. All you have to do is locate the extender’s WiFi name on your device and access it using the correct password.

Step 4: Move Your WiFi Extender

When you’re done setting up the extender, you may put it anywhere you choose in your house or office. Do this by disconnecting the Wavlink extender and relocating it to the desired spot in your home or workplace. However, avoid placing your device in a location where its signals are likely to get interrupted.

• Simply connect the extender to an electrical socket and turn it on.
• To finish, open a web browser and go to wifi.wavlink.com.
• Here you may adjust your Wavlink wireless extender’s settings to meet your specific WiFi needs.

Our best wishes are with you that you have found the above information to be very useful in the process of performing Wavlink setup Want to share your experience with the Wavlink extender? Leave a comment.

Why Change Wavlink Extender WiFi Settings?

Wavlink is among the largest producers of networking devices. It means the number of devices manufactured by Wavlink can’t be guessed. But, what others can easily guess is your Wavlink extender WiFi password via its SSID. You might be unaware but the default WiFi name and password of all Wavlink extenders are the same making them vulnerable to unauthorized attacks. That is why customizing them must be your priority.

Moving on, let’s have a look at the steps to change the WiFi settings of the Wavlink range extender.

How to Change Wavlink Extender WiFi Settings?

Step 1- Power Up the Extender

First of all, find a wall outlet near your home router and plug your Wavlink WiFi range extender into it. Press the Power button to the ON position and ensure that the extender is receiving a fluctuation-free power supply.

You can verify it by checking the workability of the power socket. If the power socket is found damaged, then it is advised to either get it repaired or use another one to power up the extender. You can also use a UPS to prevent your Wavlink extender from power outages.

Step 2- Connect WiFi Devices

The next step is to create a connection between the Wavlink WiFi extender and the host router. You can either use an Ethernet cable or a wireless source. But, make sure that the connection between both devices is stable and secure.

The conditions for a stable connection using both sources are different. While using a wireless source, make sure that both devices are not placed too far from each other. Also, they must not stick with each other. If you have used an Ethernet cable, then ensure that is free of wear and tear. But, make sure that the connection is firm, i.e. the Ethernet cable is properly connected to the ports of both WiFi devices.

Step 3- Switch on Your PC

Once you are done connecting your WiFi devices, pay attention to the PC and switch it on. Ensure to temporarily disable antivirus application installed on your PC. Doing so will prevent you from facing issues while changing the Wavlink extender WiFi settings.

Thereafter, open a web browser that is running on an updated software version and is free of cache, cookies, and browsing history. Know that you are free to use any web browser like Google Chrome, Mozilla Firefox, Apple Safari, Microsoft Edge, etc.

Step 4- Access Wavlink Login Page

Now, go to the address bar of the web browser and type the default web address of the Wavlink WiFi extender. You can check the default web address by referring to the user manual. It contains every detail of the Wavlink extender model you own.

Keep in mind not to make any typing mistakes while entering the default web address. Once done, press the Enter key. Also, avoid entering the web address into the search bar of the web browser. Else, you won’t be able to reach the Wavlink WiFi extender login page.

Step 5- Log in to Your Extender

Now, you will see the Wavlink login page. Here, enter the default username and password of the extender and click the Login button.

Remember that the default login credentials of your Wavlink WiFi range extender are case-sensitive. So, you have to be very careful while typing them. Double-check them before hitting the Login button.

Step 6- Change WiFi Settings

The moment you click Login, you will be taken to the Wavlink extender setup dashboard. Now, select the WiFi option and click the WiFi Setup tab.

The WiFi Setup tab will welcome you. Here, enter the new SSID and password for your Wavlink WiFi extender and save the new changes.

In this way, you can change the Wavlink extender WiFi settings with ease by accessing the extender’s dashboard. Older WiFi settings of your extender will no longer be in effect.

Final Words

That’s all about how to change Wavlink extender WiFi settings. Let’s hope that you will be able to do so with the help of this post in order to safeguard your WiFi network and improve internet speed. You can further boost the WiFi speed by regularly performing Wavlink firmware update download. Thanks for reading the article.

Are you also sailing in the same boat? If you are nodding your head in yes, then get ready to smile. Because the issue you are facing is going to get resolved after implementing the troubleshooting tips discussed in this post. Want to know those Wavlink extender troubleshooting tips? Read on.

Fixed: Wavlink Extender Not Working After Firmware Update

1. Reboot the Extender

Has your smartphone ever stopped working? Yes? What do you do then? You restart the smartphone to get it back to its normal working state. Well, you have to do the same thing with your Wavlink WiFi extender. However, the process of rebooting the smartphone and extender is completely different.

To give a perfect reboot to your Wavlink WiFi extender, you need to switch it off, unplug, wait, re-plug, and switch it on back. Now, check whether the Wavlink extender has started working or not. If not, be ready to implement the next troubleshooting tip.

2. Check Ethernet Connection

Have you used an Ethernet cable to connect your Wavlink WiFi extender to the host router? Now, check its periphery and see if it has any cut. Any cut found? Oh! It looks like your Wavlink WiFi extender is not working due to a damaged Ethernet cable. Why don’t you get a new Ethernet cable? After getting a new Ethernet cable connect your WiFi devices properly.

Quick Tip: Not in the mood to buy a new Ethernet cable? You can connect your devices wirelessly too. So, opt for a wireless source and connect your extender to the router. Just make sure that they both are placed neither too close nor too far.

3. Check the Firmware Version

You might also experience the Wavlink extender not working after firmware update issue if you haven’t updated the correct firmware on your WiFi device. To get success with the entire process and make your Wavlink extender high-performing, it is suggested that you update the firmware of your extender as per its model number.

On the off-chance you haven’t updated the correct firmware version on your Wavlink extender, then you have no option left other than resetting your WiFi device.

4. Reset the Extender

As mentioned earlier that you have to reset your WiFi device and do Wavlink WiFi extender setup again, have a look at the steps to reset your extender.

• Ensure that your Wavlink WiFi extender is getting a stable power supply.

• Now, start looking for the Reset button on your Wavlink extender.

• Once found, press it carefully.

• Within a minute or two, your Wavlink extender will start running on the factory default mode.

That’s how you can reset your Wavlink WiFi extender. Once done, do not forget to set up your Wavlink device again. Thereafter, update the firmware. Walk through the next section to get acquainted with the firmware update process.

How to Do Wavlink Extender Firmware Update?

Read the step-by-step guidelines mentioned below and learn how to update the firmware of your Wavlink WiFi range extender:

• Turn on your Wavlink extender and connect it to the host router properly.

• Now, open a web browser on your PC.

• Make sure that the web browser is not running on an outdated version.

• Thereafter, download the correct firmware file of your Wavlink WiFi range extender.

• Once done, launch a new tab on the web browser and head over to its address bar.

• Type the default web address of the Wavlink extender into it and press Enter.

• When welcomed by the official login screen, enter the default Wavlink login password and username into their respective fields.

• Click Log In.

• You will get redirected to the Wavlink extender dashboard.

• Select Set Up and look for the Firmware Upgrade option.

• Now, click the Apply button on the Firmware Upgrade window.

• Locate the firmware file and click the Apply button.

• Let the firmware upgrade process get completed.

Caution: Do not interrupt the Wavlink firmware upgrade process by switching off your extender and closing the web browser.

Sum Up

This was all about what to do if your Wavlink extender stops working after firmware ipdate. Let’s hope that the tips discussed in this post will help you in making your extender up and running again. If this article has helped you, do not forget to leave a word of appreciation in the comment section.