If a hacker or unauthorized user gets the admin password of your D-Link wireless range extender, your entire home network will be at risk. Therefore, it is very significant that you change the admin password of your wireless device.
In case you are not sure about the process, walk through this article. Here, we have mentioned the step-by-step guidelines, following which you will be able to change the admin password of your D-Link extender in a fraction of seconds via http://dlinkap.local.
How to Change D-Link Extender Admin Password?
- Plug your D-Link wireless range extender into a wall socket.
- Press the power button.
- Wait for the power LED to become green.
- Take an Ethernet cable.
- Plug one end of the cable to the extender and another to your home router.
- Switch on your laptop.
- Open an internet browser.
- Type dlinkap.local in the address bar of the internet browser.
- Press the Enter key.
- You will find yourself on the official login page of your D-Link extender.
- Enter the default admin username and password.
- The dlinkap.local setup wizard will come into view.
- Head over to the Management section.
- Click the Admin option.
- Enter a new password under the Admin Password field.
- Enable CAPTCHA graphical authentication.
- Click the Save button.
In a couple of seconds, you will successfully be able to change the admin password of your D-Link wireless range extender. In case, you come across any issues while doing so, consider following the troubleshooting hacks highlighted below.
Not Able to Change D-Link Extender Admin Password?
- Reboot Your D-Link Extender
Start troubleshooting the issue you are currently facing by rebooting your D-Link range extender. Here is how you can go about the process with ease:
- Unplug your D-Link wireless range extender from its wall socket.
- Wait for a couple of seconds.
- Plug your D-Link wireless range extender back into the wall socket.
Once you are done rebooting your device, try to change its admin password. If you didn’t get any luck, follow the next hack.
- Verify the Ethernet Connection
If the Ethernet cable connecting your D-Link wireless range extender and your home router is damaged from any point, replace it with a new one. Want to choose the easier option? Well, then, connect your devices with the help of a wireless source.
- Pull Your WiFi Devices Closer
If you have your D-Link wireless range extender far from your home router, consider rectifying your mistake right away by bringing your devices closer.
Are you still not able to change the password of your D-Link extender? Well, that might be because the firmware of your device is not running on an updated firmware version.
- Perform D-Link Firmware Update
Follow the instructions outlined below and learn how to perform D-Link firmware update:
- Launch an internet browser on your device.
- Access dlinkap.local.
- Log in to your D-Link extender using the default username and password.
- You will find yourself on the D Link extender setup wizard.
- Click the Management option.
- Hit Upgrade.
- Click the ‘Check for New Firmware’ option.
- If any new firmware version is available, click the Upgrade Firmware button.
- In some time, the firmware of your device will get updated.
Note: If you need more details regarding the D-Link extender firmware update process, kindly refer to the user manual.
To Conclude
With that, our guide to change the admin password of the D-Link wireless range extender has concluded here. Let us hope that the aforementioned guidelines helped you change the password of your device without any hassle.
Now, no hacker or unauthorized user will be able to access your device and steal your personal information without your consent.
