Regarding value for money and customer service, the Victony WiFi AC1200 Extender Setup is the best wifi range extender available. It also makes it faster for your laptop or computer to publish, download, and watch HD videos online, which is quite beneficial. Additionally, everything you do online is made simpler, safer, and quicker. The Victony AC1200 WiFi Extender’s 1200 MBPS speed makes this possible.
Victony WiFi AC1200 Extender Setup using WPS
The VICTONY WIFI EXTENDER can be configured via WPS by doing the following:
- Place your router and extender in the same room.
- Check the power LED to see if it is emitting a consistent colour of light.
- From this point on, finding the WPS button on your extension and router will be simple.
- Push the button for two to three seconds on each succeeding gadget after you’ve located it.
- If you notice the green light on your extender blinking, your router and the extender have been successfully connected.
- You must then wait 10 to 15 seconds for the devices to recognise one another and function normally.
- On the extender, a solid green LED will illuminate when the connection is made successfully.
Note: Follow the instructions for your wifi range extender on the screen if you need any help with it. Visit the official website, ap.setup, for additional details.
Setting up a Victony AC1200 Extender via a web browser
When first setting up VICTONY WIFI EXTENDER with the BROWSER, the following steps must be followed:
- First, connect the power supply for your WIFI EXTENDER.Furthermore, in this scenario, it is not necessary to connect in close proximity to the router.
- Give the extender time to properly ramp up before turning on the LED indication, which at this point should be a solid green colour.
- After that, access the WIFI manager using a computer, laptop, or smartphone. The network will eventually become unsafe, linking your extensions to the network it is a part of.
- Your network connection has been established successfully. Open your favourite browser and go to the URL bar. The URL for the webpage must be copied and pasted. To finish the process, press the enter key on the keyboard.
WHAT IS THE VICTONY WIFI RANGE EXTENDER CONFIGURATION?
I assume you’re still having trouble configuring your VICTONY WIFI RANGE EXTENDER . It’s possible that your web browser is to blame; thus, think about switching to the IP address 192.168.10.1 or using a new browser.
- Setup your VICTONY WIFI RANGE EXTENDER using the steps below:
- Start by putting both items in the same spot (router & extender).
- After attaching your VICTONY WIFI RANGE EXTENDER AND ROUTER to an electrical socket, plug it in.
- Start by putting both items in the same spot (router & extender).
- After attaching your VICTONY WIFI RANGE EXTENDER AND ROUTER to an electrical socket, plug it in.
- Check again after making sure there are no ETHERNET wires connected to your extender.
- Check your WiFi extender’s LED light after that. It is reasonable to assume that your router is ready for a connection if only one power light is on.
- After that, in order to utilise your VICTONY WIFI RANGE EXTENDER, you must be connected to the internet.
- The top of the list is the Victony AC1200 and N300 WiFI range extender, one of the best wifi extenders available.
