Performing firmware update is one of the finest ways to improve the productivity of your Wavlink WiFi extender. However, many users have complained that their Wavlink WiFi extender has stopped working after upgrading the firmware.
Are you also sailing in the same boat? If you are nodding your head in yes, then get ready to smile. Because the issue you are facing is going to get resolved after implementing the troubleshooting tips discussed in this post. Want to know those Wavlink extender troubleshooting tips? Read on.
Fixed: Wavlink Extender Not Working After Firmware Update
- Reboot the Extender
Has your smartphone ever stopped working? Yes? What do you do then? You restart the smartphone to get it back to its normal working state. Well, you have to do the same thing with your Wavlink WiFi extender. However, the process of rebooting the smartphone and extender is completely different.
To give a perfect reboot to your Wavlink WiFi extender, you need to switch it off, unplug, wait, re-plug, and switch it on back. Now, check whether the Wavlink extender has started working or not. If not, be ready to implement the next troubleshooting tip.
- Check Ethernet Connection
Have you used an Ethernet cable to connect your Wavlink WiFi extender to the host router? Now, check its periphery and see if it has any cut. Any cut found? Oh! It looks like your Wavlink WiFi extender is not working due to a damaged Ethernet cable. Why don’t you get a new Ethernet cable? After getting a new Ethernet cable connect your WiFi devices properly.
Quick Tip: Not in the mood to buy a new Ethernet cable? You can connect your devices wirelessly too. So, opt for a wireless source and connect your extender to the router. Just make sure that they both are placed neither too close nor too far.
- Check the Firmware Version
You might also experience the Wavlink extender not working after firmware update issue if you haven’t updated the correct firmware on your WiFi device. To get success with the entire process and make your Wavlink extender high-performing, it is suggested that you update the firmware of your extender as per its model number.
On the off-chance you haven’t updated the correct firmware version on your Wavlink extender, then you have no option left other than resetting your WiFi device.
- Reset the Extender
As mentioned earlier that you have to reset your WiFi device and do Wavlink WiFi extender setup again, have a look at the steps to reset your extender.
- Ensure that your Wavlink WiFi extender is getting a stable power supply.
- Now, start looking for the Reset button on your Wavlink extender.
- Once found, press it carefully.
- Within a minute or two, your Wavlink extender will start running on the factory default mode.
That’s how you can reset your Wavlink WiFi extender. Once done, do not forget to set up your Wavlink device again. Thereafter, update the firmware. Walk through the next section to get acquainted with the firmware update process.
How to Do Wavlink Extender Firmware Update?
Read the step-by-step guidelines mentioned below and learn how to update the firmware of your Wavlink WiFi range extender:
- Turn on your Wavlink extender and connect it to the host router properly.
- Now, open a web browser on your PC.
- Make sure that the web browser is not running on an outdated version.
- Thereafter, download the correct firmware file of your Wavlink WiFi range extender.
- Once done, launch a new tab on the web browser and head over to its address bar.
- Type the default web address of the Wavlink extender into it and press Enter.
- When welcomed by the official login screen, enter the default Wavlink login password and username into their respective fields.
- Click Log In.
- You will get redirected to the Wavlink extender dashboard.
- Select Set Up and look for the Firmware Upgrade option.
- Now, click the Apply button on the Firmware Upgrade window.
- Locate the firmware file and click the Apply button.
- Let the firmware upgrade process get completed.
Caution: Do not interrupt the Wavlink firmware upgrade process by switching off your extender and closing the web browser.
Sum Up
This was all about what to do if your Wavlink extender stops working after firmware ipdate. Let’s hope that the tips discussed in this post will help you in making your extender up and running again. If this article has helped you, do not forget to leave a word of appreciation in the comment section.