A significant portion of the global burden of illness and mortality is attributable to injuries. On a worldwide scale, it is estimated that there are 61 unintentional injuries for every 1,000 persons, with the vast majority of these occurring in low- and middle-income countries (WDR, 1993). Every year, around 4 million people pass away as a result of the injuries they sustained.
How much important is workplace safety?
According to a study that was compiled by IndsutriALL, during the years of 2014 and 2017, Indian workplaces were the scene of 8004 tragic occurrences, which resulted in the loss of the lives of 6368 workers.
Because these are such enormous losses, it is very necessary for companies and government organisations to pay attention to the problem and begin making efforts to bring these numbers down to zero. While we are on the subject of this discussion, one action that should be implemented is the proper use of barricade tape or warning tape to demarcate threat-possessing zones in order to minimise mishaps that might have been avoided at the at least.
Barricades Tapes
Barricade tapes, which also go by the names Warning tape and Caution tape, are used to disseminate warning messages as well as to limit access to work sites and other potentially hazardous areas. The purpose of these tapes, which are non-sticky and brightly coloured, is to attract your attention so that we may lessen the likelihood of serious incidents and keep everyone safe.
On the majority of these warning cassettes, the two most common cautions printed are “caution” and “danger.” These two terms are sometimes used interchangeably depending on the discretion of the user, but if we look at the ideal usage, caution tapes are typically used to alert people working in hazardous areas and instruct them to exercise caution while doing work at the site, whereas danger tapes are used to prohibit all entries into the dangerous areas except for the entries of the authorised personnel in order to avoid dangers that could either become the cause of serious injury to them or their colleagues.
The Application of Barricade Tapes
Barricade tapes may be used in a wide range of contexts to improve safety in a number of settings by drawing attention to high-risk regions or by delineating restricted zones. These caution tapes are often used in a variety of settings, including the following examples:
It is possible to construct containment solutions in areas that have been walled off using abatement tapes by combining the usage of Warning Tape with the abatement tapes. This will provide polluted regions an increased level of seclusion.
On construction sites, barricade tapes are used to either warn passing motorists away from dangerous areas or to block off such areas. In 2016, there were more than one thousand people who lost their lives due to accidents in the construction business. Warning tapes that are positioned appropriately may assist in preventing mishaps like this as well as other injuries that are often sustained in this industry.
Barricade tapes are used by law enforcement personnel in the process of traffic management.
Barricade tape is used by both law enforcement and forensics professionals in order to prevent outside meddling at crime scenes. This helps to ensure that the integrity of the investigation is not compromised.
Because they were developed specifically to enhance the health and safety of other people, barricade tapes are very useful for preventing access to potentially hazardous areas as well as providing warnings about their presence. If you deal with hazardous chemicals as part of your job, you need to take precautions to ensure that hazardous areas are adequately labelled in order to keep everyone in the workplace safe and to reduce the likelihood of serious accidents occurring there.
read more: click
