How to install extender using Ap.Setup

Ap.setup is an offline website that can only be visited while your wavlink extender is wired or wirelessly connected to the device. The WPS method can be used by the user to configure the new AP extender.

Setting Up an Extender Using Ap.Setup

• Connect the Extender to the outlet.
• Use your web browser to navigate to Ap.setup right away.
• To access the Ap Setup page, enter your username and password.
• You may setup and manage your Wavlink extender once you’ve logged in.
• If ap.setup isn’t functioning, contact our help.
• During initial Ap.setup, make sure your extender is close to the router.

Ap.Setup login

Any device that has a web browser, such as Google Chrome, Edge, or Firefox, can access Ap.setup. You must ensure that your device is connected to a repeater in order to successfully connect to ap.setup. The IP address that serves as a backup for the Ap.setup page is 192.168.10.1. You can contact our Ap support staff, who are qualified to resolve any problems associated with the extender installation, if you are still having trouble connecting with the ap setup web user interface.

Using Ap setup, setup your repeater as follows:

1. Plugging the extender into a power outlet will turn it on.
2. Connect your wireless device to a wireless network, such as an AC or N network.
3. A web browser, such as Chrome, Safari, or Edge, should be opened.
4. Now fill in the address bar with Ap.setup or https://ap.setup.
5. The login question should appear on the Ap.Setup dashboard.
6. For any more modifications or setup, adhere to the on-screen directions.

Wavlink ac1200 wifi extender setup

For a step-by-step guide on how to install the Wavlink AC1200 using WPS, see the details below:

• The Wavlink AC1200 must be connected to a power source.
• Keep an eye out for the extender’s solid blue light to turn on, which will show that it is turned on.
• At this point, press the WPS button on the extender.
• Press the WPS button on the wireless router or modem after that.
• The extender’s LED should not be removed while it is blinking.
• The configuration of the wavlink extender is completed using the wps method.
• The WiFi repeater’s power, client, device, and WPS indicators will all turn solid green as a result.
• Install the Wavlink repeater in the areas with the weakest signals now. as well as secure WiFi connectivity.

Note:- if you need any help regarding wifi extender so contact our technician or visit the official website that is wavlink ac1200 wifi extender setup.

Ap Setup | Ap Extender Setup | Access point

The Wifi signal is improved in the dark field using the AP.setup mechanism. The WiFi repeater technology has increased the current wifi network’s coverage to low signal or no coverage areas without changing the network’s branding. You can use whatever mode as needed because each Range Extender provides Access Point (ap.Setup) and Repeater mode.

1. How to configure your extender as an access point or an AP
2. For initial configuration, connect the AP extender close to the primary router.
3. Once the wifi booster has a solid green light, you will know it.
4. Pick a Cat5 cable or any Ethernet cable.
5. And then join the Ap wireless extender to the Ethernet/cable on one end.
6. Add the main router to the Ethernet cable’s other end.
7. You will see that the router light on the booster turns bright green if the Cat5 cable was connected correctly.
8. Now, on any wifi-enabled device, use a web browser and enter ap.setup or 192.168.10.1
9. You are now on the setup page for the Ap range extender.
10. Create an account on Ap Login and adhere to the installation instructions to install the wireless booster.