Routerlogin.net is the default web address offered by Netgear to help its users configure their routers without any hassle. Although with the execution of some simple steps, anyone can install their routers; still some users find the process a bit tricky. If you are also facing a problem with the setup process of your router due to the routerlogin.net not working issue, then this troubleshooting guide is what you need to check.
Below is the list of reasons explaining why you can’t access the routerlogin web address:
- Improper connectivity between your router and modem
- Placement of the router is not up-to-the-mark
- Use of outdated web browser
- Wrong web address has been used
- WiFi interference from nearby objects
- Technical glitches
As you have now got familiar with the reasons that might be causing the routerlogin.net not working issue for you, let’s now reveal the troubleshooting tips. Walk through the section below and find how you can fix the issue at hand. Let’s get started.
Troubleshoot Routerlogin.net Not Working Issue
- Check the Connections
Improper connections could be the culprit behind the issue you are facing with your Netgear router. Thus, we suggest you have an eye on the connection between your router and modem.
If both the devices have been connected using a wireless source, then confirm a stable connection has been established between both the devices. For this, check the LEDs on your router. They must be glowing green. Just in case you have used an Ethernet cable to connect the router to the modem, then confirm that it has no cuts. A damaged Ethernet cable (if used) will take you to nowhere rather than the routerlogin not working issue.
- Change Placement
To get the most out of your router, it is necessary that you place the device at its ideal location. For your information, a router should be placed in the central area of your home and over a higher surface.
Therefore, if you have placed the device under a table, in a corner, or inside a cabinet; consider giving it a place in an open area. You can also mount the WiFi device on a wall if unable to find a higher surface to place it.
- Update Your Web Browser
Routerlogin.net not working issue will keep bothering you if the web browser used for accessing the web address is not updated. Hence, update your web browser to the latest software version by navigating to its settings.
You can also switch to another web browser that is already updated as the www.routerlogin.net web address supports working on most web browsers like Chrome, Mozilla, and Edge. Before ditching the current web browser, however, make sure the one you are planning to switch to is not carrying the junk of cache and cookies.
- Cross-check the Web Address
It has been found that sometimes users, in hurry, commit typing mistakes while entering the routerlogin web address into its designated field. If you have gone through the same, then getting the routerlogin.net not working issue is obvious.
To get the issue fixed, you are suggested to enter the web address correctly into its field. Also, make sure you have entered the routerlogin URL into the address bar of your browser rather than in the search bar.
- Keep WiFi Interference Away
The closeness of your router near appliances emitting radio waves could be another reason why you can’t access the Netgear router login page using routerlogin.net. In such a case, you need to place the router away from things like Bluetooth speakers, microwave ovens, refrigerators, treadmills, baby monitors, cellular phones, etc.
Apart from that, things like aluminum studs, reflexive surfaces, metal appliances, concrete walls, etc. can also cause the issue you are currently struggling with. Thus, keep all these things at bay while locating your WiFi router.
- Reboot Your Router
Last but not least, routerlogin not working issue can spin your head due to technical glitches with the device. And to fix these technical glitches, there is nothing better than rebooting the router.
Therefore, disconnect your router from all the connected devices. Once done, unplug the device from its power socket for some time. Given enough rest to the device? Well, now again plug the router back into its power socket and set the power button to the on position. As soon as you are done, connect the router to the modem and try accessing the default web address to see if the issue has been fixed or not.
This is all about how can you fix the routerlogin.net not working issue. Let us know in the comments which trick helped you get the issue fixed. Your feedback is awaited!
